DP-876X
4 Digit Temperature Indicator with Celcius or Fahrenheit Display
See bottom of page for Pricing
4 Digit temperature indicator capable of displaying °C or °F from J, K and T thermocouples or 4 wire Pt 100 RTD's. Using the relay output option the unit is capable of ON/OFF control of a process.
• 14.2mm High visibility LED display
• 1/8 DIN (96mmX48mm) bezel
• Fully programmable
• Program lock out facility
• AC and DC powered models available
• Analog re transmission option
• Dual relay output option
• RS485 communications option
• CE, cUL and UL recognized
• 1/8 DIN (96mmX48mm) bezel
• Fully programmable
• Program lock out facility
• AC and DC powered models available
• Analog re transmission option
• Dual relay output option
• RS485 communications option
• CE, cUL and UL recognized
• Watchdog alarm for PID controller back up
• Temperature indication for process control monitoring
• ON/OFF control of temperature systems
• Temperature indication for process control monitoring
• ON/OFF control of temperature systems
| Cutout: | ||
| Height | 1.22" (45 mm) | |
| Width | 3.62" (92 mm) | |
| Power Supply | AC Powered 85-265VAC 47-63Hz 20VA |
| DC Powered 9-30VDC 12VA | |
| Display | 14.2 mm High visibility LED Display |
| Signal Input | J, K and T thermocouples and 4 Wire Pt100 RTD Sensor Excitation175µ ADC |
| Ranges | J -200° to 760°C (-328°-1400°F) |
| K -200° to 1370°C (-328° to 2498°F) | |
| T -200° to 400°C (-328° to 752°F) | |
| RTD -200° to 850°C (-328° to 1562°F) | |
| Accuracy | +/- 1°C and +/- 100PPM/°C (ambient) plus +- 1°C thermocouple cold junction |
| Optional Outputs | |
| Relay output | 2 SPCO (Form C) relays |
| Contact rating 5A 250VAC or 30VDC @ unity power factor | |
| Analog retransmission | 4-20mA (<750 & load ) and 0-10VDC (> 2500 & load) |
| RS485 Serial Communications | Baud rate 1200,2400,4800,9600 or 19,200 programmable Parity Even, odd or no parity |
| Address 00-99 | |
| Data Retention | EEPROM 100years duration |
| Operating Temperature | 0-50°C |
| Storage Temperature | -20-70°C |
| Humidity | 0 to 85%RH non condensing |
| Vibration | 2.5 g's 30-200Hz |
| Shock | 30g's |
| Front Panel Protection | IP65 when properly mounted using gasket supplied |
| Approvals | CE UL and cUL |